Select Active is used to quickly select every light with a non-0 intensity.
Usage
This command has implied usage. See the example below.
See Select Last and Select Manual
Examples
Note: This example assumes you clear between each command.
1
▶
At
▶
Full
▶
Enter
Group
1
▶
At
▶
50
▶
Enter
15
▶
At
▶
22
▶
Enter
1
▶
Out
Select
Active
▶
Enter
Will Select Group 1, and Channel 15.
Select
Active
▶
Select
Active
▶
Enter
Selects any active channel, not including channels given intensity by active submasters.
Note: You must press Select Active twice quickly for this to work!
On Keyboard
Select Active
is mapped to CTRL + A on a QWERTY keyboard.
Bea MacDonald