Go To Cue | Tech Theatre Wiki

Go To Cue is used to quickly jump to a cue much later or much earlier than the current cue. It can also be used to jump to a cue in a different cue list.

Usage

Type Go To Cue and the ID of the cue you want to jump to.

You can also use two other variants of Go To Cue, see the examples below.

Examples

Go To Cue ▶ 5 ▶ Enter

Goes to Cue 5 in the currently active (and primary if multiple are active) cue list

Go To Cue ▶ 4 ▶ / ▶ 3 ▶ Enter

Goes to cue 3 in cue list 4.

Go To Cue ▶ Out ▶ Enter

Exits the cue list by jumping to the top of the cue stack (setting the first cue to be pending). Also resets all lights to their home state / background values if another source is present.

Go To Cue ▶ 0 ▶ Enter

Goes to the first cue in the active cue list. Sets intensity to the default state, but not non-intensity properties. Sets the first cue to be pending

Go To Cue 0

A special button on the console. Holding this button down and pressing Load for any active cue list will perform the active of Go To Cue, 0 above.

On Keyboard

Go To Cue is mapped to CTRL + G on a QWERTY keyboard.

Go To Cue 0 is mapped to CTRL + ALT+ G on a QWERTY keyboard.

Bea MacDonald