Select Manual is used to quickly select every light that has a manually set (ie, not recorded) value
Usage
This command has implied usage. See the example below.
Tip: If a light is currently “Manual”, its intensity number will be red on the Magic Sheet and Live Table
See Select Active and Select Last
Examples
Note: This example assumes you clear between each command.
1
▶
Thru
▶
100
▶
50%
▶
Enter
Record
▶
Cue
▶
1
▶
Enter
1
▶
At
▶
Full
▶
Enter
Select
Manual
▶
Enter
Selects Channel 1, as it is the only channel that was modified after the most recent record.
1
▶
Thru
▶
10
▶
Select
Manual
▶
Enter
Selects any light between channels 1 and 10 that has manual data.
On Keyboard
Select Manual
is mapped to CTRL + M on a QWERTY keyboard
Bea MacDonald